Huber Products |
Please find below a small selection of Huber’s new products.
For more information on the full Huber range please download the Huber Catalogue click here.
Petite Fleur - the baby Tango
The Petite Fleur is the smallest and entry level unistat for temperature control applications in the mid range
-40°C to 200°C. The Petite Fleur in comparison with the Tango Nuevo, is 2/3rds the size, 2/3rds the power and 2/3rds the price.
The first version of Petite Fleur, the baby Tango, uses proven Unistat technology and is designed for externally closed applications, e.g. reactors. The unit features the familiar Unistat expansion tank and the large illuminated sight glass. A second version for open bath applications is under development.
Control & Functionality for all Applications
The Petite Fleur features the CC-Pilot Professional controller and display. The units powerful variable speed pump combined with the VPC pressure control and the TAC adaptive internal and cascade control ensure the best possible results. Units also feature a factory installed ComBox communications interface as standard. The unit has two M16 hose connections on the rear.
Lift and Roll
Just 260 mm wide the baby Tango is ideally suited to fit in fumehoods. The castors fitted at the back of the unit allow it to be easily brought to the required position, just lift and roll.
Ready for action
Where the application is regularly changed, residual water in hoses and reactors can be a problem because the water mixes with the thermal fluid and inhibits the heat transfer process. The Petite Fleur features a new water separation system which allows water to be removed from the thermal fluid during operation.
More Power
DIN 12876 requires that cooling powers are measured and quoted at full pump speed. However, reducing the pump speed reduces the heat energy entering the system, which In turn leads to higher cooling powers and lower end temperatures – indeed an extra 30 to 50 Watts can be achieved.
For more information visit Huber GmbH
Return to the Huber Product Summary page
|
|
|
MPC Thermostats - Simple low cost Thermoregulation
The new Huber MPC (Micro Processor Control) is a modern, low cost immersion circulator which has been purposely designed with basic functionalities - so you only pay for what you need.
The MPC immersion circulators operate across the temperature range of -30°C to +200°C and combine with either polycarbonate or stainless steel baths to provide precision heating and cooling for both routine and sensitive laboratory procedures.
The MPC controller has a large temperature display, LED indicators for the pump and three easy to use keys for a simple user interface. As with all Huber thermostatic devices, safety is a priority; with the MPC range featuring over temperature alarm and low-liquid level protection. All MPC models also feature a powerful pressure and suction pump for optimum performance.
For customers requiring more functionality, the MPC is available in an advanced version, which offers the added benefits of an RS232 interface, as well as the facility for using an external sensor.
The MPC immersion circulator can be purchased on its own or with a bath. Baths are available in different materials, and sizes from 6 to 25 litres. The polycarbonate baths are transparent with operating temperatures up to 100°C. The insulated stainless steel baths have a maximum working temperature of 200°C. For sub-ambient applications the MPC can be combined with a refrigerated bath.
For more information visit Huber GmbH
Return to the Huber Product Summary page
|
|
|
|
202C & 205B Heating Circulators with MPC Thermostats
Low cost heating of external applications
The popular 202C and 205B Heating Circulators are now available with the entry level MPC Thermostats.
The new MPC (Micro Processor Control) is a modern, low cost immersion circulator which has been purposely designed with basic functionalities - so you only pay for what you need.
The MPC controller has a large temperature display, LED indicators for the pump and three easy to use keys for a simple user interface. As with all Huber thermostatic devices, safety Is a priority; with the MPC featuring an over temperature alarm and low-liquid level protection. All MPC models feature a powerful pressure and suction pump for optimum performance.
MPC Advanced immersion circulators offers the added benefits of an RS232 interface and external temperature sensor
When combined with the 202C or 205B the MPC immersion circulators operate across the temperature range of 45°C to 200°C. Lower temperatures can be achieved, down to -30°C with optional refrigeration.
Due to their reduced (2 and 5 litre) bath volumes the 202C and 205B Heating Circulators are especially suited to the heating of small external applications such as reaction blocks or jacketed vessels. The temperature of small objects can also be controlled by placing them directly in the bath.
read more - MPC-202C
read more - MPC-202C Advanced
read more - MPC-205B
read more - MPC-205B Advanced
Return to the Huber Product Summary page
|
|
|
Minichillers
The Minichiller is incredibly small and extremely quiet, yet powerful enough to ensure highly stable cooling. Through efficient energy management the Minichiller is able to cool your laboratory equipment eliminating the cost of mains water and helping the environment.
Robust, reliable and simple to use the Minichiller has a LED display that provides a clear display of real-time information such as set point and actual temperature.
Save water, save £££’s, reduce risk of flooding!
The Minichiller offers efficient, safe and cost effective cooling in your laboratory...
Typical Applications...
- A standard rotary evaporator
- A series of small standard lab condensers
- Reaction blocks or parallel synthesisers such as the Carousel
Large savings on water consumption
The Minichiller can service up to 5 standard lab condensers simultaneously which represents a typical saving of £3000* in water charges per year *5 condensers running 8 hours per day, 20 days per month on a medium flow rate of 5 litres per minute, at 0.1p per litre.
Reduce the risk of flooding
The maximum internal coolant capacity is limited to 2 litres, thereby restricting any flood to this volume.
Constant cooling without pressure drop
Pressure drops in your mains water supply can cause erratic cooling which can significantly affect your work. This is a particularly common where larger scale apparatus is used elsewhere on the same water supply.
Microprocessor Control
Simple, low cost digital temperature controller with 0.1°C display resolution, adjustable alarm limits and level monitory.
For more information visit Huber GmbH
Return to the Huber Product Summary page
|
|
|
Ministats - compact heating and cooling
The Ministats compact size makes it idea for use in fumehoods or crowded benches.
All units feature a powerful variable speed pressure/suction pump that can heat or cool objects either in the internal bath or externally e.g. reaction vessels. The small bath volume and high power means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50% amplifying this effect. All models have ‘Active Cooling Control’ which allows cooling even at the maximum working temperature. The bath opening allows small objects to be heated or cooled in the internal bath. All components in contact with the thermofluid are made of stainless steel or high quality plastic.
More Power
DIN 12876 requires that cooling powers are measured and quoted at full pump speed. However, reducing the pump speed reduces the heat energy entering the system, which in turn leads to higher cooling powers and lower end temperatures – indeed an extra 30 to 50 Watts and 5°C lower end temperatures can be achieved.
Standard Features
- CC-Pilot controller with choice of 3 control options
- All CC-Pilots can be remotely located with use of the optional Pilot table stand on bracket
- Compliant with DIN 12876-1, class 3 allows use in unsupervised areas for continual operation
- RS232 interface and connection for optional ComBox
- Pt100 External-Sensor
- Adjustable over temperature and level protection
- M16 Pump connections for external applications
- Drain port at front
Increased functionality with optional accessories:
- External pressure sensor for VPC pressure control
- Combox: With RS232, RS485 and programmable volt-free contact
- Displacement inserts
For more information visit Huber GmbH
Return to the Huber Product Summary page
|
|
|
CC-Pilot Controllers
The New CC Pilot controllers come with a choice of 3 control options; Basic, Exclusive and Professional and units may be easily upgraded from one level to another via an electronic upgrade.
Plug & Play technology
The CC-Pilot controllers have a large, bright, LCD colour screen with display of internal, process and set point temperatures for ease of viewing across the lab (with the option of a real time graphical display of temperature curves). Safety information such as over temperature setting, set point limits, bath level indicator, alarms and pump pressure/ speed can be displayed simultaneously. With the addition of time and date, a huge amount of information is now available at a glance. The easy-to-use menu system gives simple access to all functions using the ‘turn to search’ - ‘push to select’ encoder.
Easy to use with added functionality
For customers with very simple control requirements the CC-Pilot is available as an economy, entry level ‘Basic E-grade’. Additional functions are easily accessed by purchasing an Electronic Upgrade and upgrading the CC-Pilot to ‘Exclusive E-grade’ or Professional E-grade’. Units may easily be upgraded by the user at any time after purchase by using a code to unlock the next level of software functionality.
Exclusive E-grade’ controllers include the option of better 0.01ºC resolution temperature display, True Adaptive Control intelligent self optimizing control, graphic display of temperature curves, process control, ramp function and 15 program steps through 3 programs. Professional E-grade’ controllers add non-linear ramping, user and administrator menus, second set point function and 100 program steps through 10 programs.
For more information visit Huber GmbH
Return to the Huber Product Summary page
|
|
|
NEW Unistats 905w, 912w and 915w - Temperature control from -90°C to +250°C
Designed to give the highest possible flow rates, the new Unistats feature an efficient variable-speed pump with soft start. This enables the safest and fastest ramp rates resulting in tighter control of process temperature while protecting your reactorand maximising process efficiencies. The pressure of the thermal fluid is closely controlled and monitored by an adaptive controller that brings a new level of precision to thermal control that can be delivered to a wide variety of applications.
The hydraulically sealed Unistats allows thermofluids to be used safely above their flash point without the fear of ignition. In addition, because the thermofluids are not exposed to the atmosphere whilst being heated/cooled, they do not give off vapours, prevent ice ingress within the thermofluid and thereby extend the life of the thermofluid.
Consistent with the entire Unistat range, the New Unistats feature the Unistat Pilot. An easy to use touch screen controller, with simple to access menus displaying all the key parameters, including, process temperature, jacket temperature, fluid pressure and safety settings. The Unistat Pilot also allows users to view dynamic data in a real-time graphic format.
All units are CFC and H-CFC free and have the option for 100% natural refrigerants. Manufactured from stainless steel all the Unistats are durable giving them extended service lives.
How are they different?
Unistat 905w
The NEW Unistat 905w offers 6 kW heating power, cooling powers from 4.5 kW @ 0°C and 0.7 kW @ -80°C and a temperature range of -90 to 250°C.
|
Unistat 912w
The NEW Unistat 912w replaces the 910w. With 6 kW heating power, cooling powers from 7 kW @ 0°C and
0.2 kW @ -90°C and a temperature range of -90 to 250°C.
|
|
|
|
|
|
|
